Lowongan Kerja PT Medco Power Indonesia Agustus 2025
Site TIMOR – Kupang, Nusa Tenggara Timur
1. Field Operator
Job Description:
- In charge of the assigned plant during normal and incident operation.
- Operate the plant with the agreement of the Unit Controller.
- Provides a field supervision service to outside the control rooms during normal and incident operation.
- In the event of a Unit Trip or on the instruction of a Shift leader /UC/AUC, immediately reports to the Control Room. They assists the Shift leader/UC/AUC during any incident by monitoring plant conditions.
- To assist the UC/AUC during planned start-ups. This role depends on the number and urgency of technical problems existing at the time.
- Operate the equipment from local control room with guidance from Unit Controller from Central Control Room.
- Provide daily report to the Unit Controller and ensure there is no problems or anomalies in the main plant
- Check and control the field situation by doing inspection and field visit, to ensure system and process in the condition as reported
Qualifications:
- Minimum Diploma Degree (D3)
- Minimum 1 years experience in fixed plant , heavy equipment or utilities operator or fresh graduate Preferable knowledge in fire protection and fire fighting
- Preferable knowledge in electrical (high voltage)
- Knowledge in basic mechanical (bearing system, hydraulic system, rotating equipment etc)
- Capable to think and solve problems logically
- Proficient in English Language
2. C&I_DCS Supervisor
Job Description:
- Perform maintenance work such as overhauling, repair, calibration, and testing of all plant DCS equipment base on established manufacturer standards;
- Maintain plant calibration database. Perform scheduled calibrations;
- Perform preventive maintenance job on all plant DCS equipment, based on established Computerized Maintenance Management System quality standards and schedules;
- Conduct routine inspection and monitoring of all DCS, and 150kV line protection system equipment conditions and performs functional check to ensure optimum reliability of the equipment/instrument;
- Report immediately to his superior any indications of abnormal conditions based on established standards set by the department;
- Perform Call-Out and On-call duties as required by operations to minimize or prevent plant downtime;
- Assist the Operations Section during start up, test and initial operation of newly overhauled plant equipment facilities, and ensure that the equipment and control are in good operating condition and optimum reliability;
- Troubleshoot and recommend appropriate actions or solutions to eliminate future reoccurrences;
- Ensure that any instrument or equipment repairs/calibrations performed by outside contractors are within the acceptable standards of the company;
- Assist during conduct of periodic parts and equipment inventory;
- Execute installation works of any plants’ facility instrument upgrading or rehabilitation project, if any, as directed by his superior;
- Maintain tools and precision instrument or equipment under his responsibility and ensures that they are in good working conditions;
- Monitor contractors’ activities, workmanship and progress to ensure compliance to specifications, standards and agreed work durations;
- Execute health, security, environmental and safety rules and regulations of the company;
- Practice recommended behaviors that adhere to the core values of the company;
- Implement and comply with company rules and policies;
- Perform other related duties that may be assigned by superiors.
Qualifications:
- Graduate of Diploma 3 Degree preferably in Electrical/Control & Instrument/Computer or Electronics Engineering;
- Minimum 5 years technical experience in power plants or similar heavy industry, experience with Geothermal facilities is an advantage;
- Good planning and computer programming skills;
- Good communication and reporting skills both verbal and in writing, specifically in English language;
- Having experiences in multi-national project development performed in various countries is desirable but not essential;
3. Warehouse Supervisor
We are looking for a Warehouse Supervisor with strong leadership and inventory management skills to support our Operation & Maintenance (O&M) team at a Coal-Fired Power Plant. This position is critical in ensuring the availability, accuracy, and safe storage of all spare parts and consumables required for plant operations.
Job Description:
- Supervise and control the storage of spare parts and consumables in accordance with established Inventory Management Procedures, Sales Orders (SO), Delivery Orders (DO), and Letters of Introduction (SP).
- Coordinate and ensure the timely delivery and issuance of spare parts/consumables to plant users.
- Maintain the cleanliness, integrity, and safety stock levels of all warehouse materials.
- Monitor and update inventory records in the warehouse management system, ensuring real-time accuracy.
- Utilize and operate IBM Maximo or similar Enterprise Asset Management (EAM) systems for inventory tracking and reporting.
- Conduct periodic stock checks, cycle counts, and participate in year-end inventory audits.
- Ensure Security, Safety, Health, and Environmental (SSHE) compliance in all warehouse activities.
- Foster good communication and coordination with both internal departments (Maintenance, Operations, Procurement, etc.) and external stakeholders (vendors, suppliers, contractors).
Qualifications:
- Bachelor’s degree (S1) in Logistics, Industrial Engineering, Supply Chain Management, or other relevant fields.
- Minimum 5 years of experience in warehouse supervision or inventory management, preferably within power plant operations, mining, oil & gas, or other heavy industrial environments.
- Proven experience with IBM Maximo system or other equivalent warehouse management/inventory software.
- Have Forklift SIO is preferable
- Strong understanding of inventory control processes, material handling, and warehousing best practices.
- Proficient in Microsoft Office Suite (Excel, Word, PowerPoint).
- Strong leadership, organizational, and problem-solving skills.
- Good communication and interpersonal abilities for cross-functional collaboration.
- High attention to detail and a proactive approach to maintaining inventory accuracy.
4. Mechanical Technician
Job Description:
- Implementing unscheduled maintenance
- Maintaining mechanical equipment and supporting equipment
- Responsible for Security, Safety, Health and Environment of work area.
Qualifications:
- Bachelor / Diploma degree in Mechanical Engineering
- Experience in the maintenance especially in mechanical System Power Plant
- Proficient in operating Microsoft office
- Fluently both speaking and written in English
- Have the skills and knowledge of Power Plant.
- Work Experiences preferably Minimum 1 (one) year experience as Technician at Power Plant or fresh graduate
5. Unit Supervisor
Job Description:
- Assist Make improvements under the Operator Leader approval of the engines and their support equipment
- Assist in recording and observing engine operation parameter data and reporting to superiors in case of equipment interruption
- Periodic monitoring of supporting equipment in the field
- Prepare the supporting data for the manufacturing of enginery operation report
- Coordination and cooperation with PLN WRKR or PLN Dispatcher and gas supplier
- Provide maximum support in achieving production targets
- Responsible for Security, Safety, Health and Environment of work area
Qualifications:
- Bachelor degree in Electrical / Mechanical Engineering
- Minimum 3 (three) years experience as Operator in Coal Fired Power Plant
- Have knowledge of Operation in Coal Fired Power Plant.
- Fluently both speaking and written in English
- Site SULUT – Bolaang Mongondow, Sulawesi Utara
6. Mechanical Technician
Job Description:
- Implementing unscheduled maintenance
- Maintaining mechanical equipment and supporting equipment
- Responsible for Security, Safety, Health and Environment of work area.
Qualifications:
- Bachelor / Diploma degree in Mechanical Engineering
- Experience in the maintenance especially in mechanical System Power Plant
- Proficient in operating Microsoft office
- Fluently both speaking and written in English
- Have the skills and knowledge of Power Plant.
- Work Experiences preferably Minimum 1 (one) year experience as Technician at Power Plant or fresh graduate
7. Field Operator
Job Description:
- In charge of the assigned plant during normal and incident operation.
- Operate the plant with the agreement of the Unit Controller.
- Provides a field supervision service to outside the control rooms during normal and incident operation.
- In the event of a Unit Trip or on the instruction of a Shift leader /UC/AUC, immediately reports to the Control Room. They assists the Shift leader/UC/AUC during any incident by monitoring plant conditions.
- To assist the UC/AUC during planned start-ups. This role depends on the number and urgency of technical problems existing at the time.
- Operate the equipment from local control room with guidance from Unit Controller from Central Control Room.
- Provide daily report to the Unit Controller and ensure there is no problems or anomalies in the main plant
- Check and control the field situation by doing inspection and field visit, to ensure system and process in the condition as reported
Qualifications:
- Minimum Diploma Degree (D3)
- Minimum 1 years experience in fixed plant , heavy equipment or utilities operator or fresh graduate Preferable knowledge in fire protection and fire fighting
- Preferable knowledge in electrical (high voltage)
- Knowledge in basic mechanical (bearing system, hydraulic system, rotating equipment etc)
- Capable to think and solve problems logically
- Proficient in English Language
8. Material Handling Operator
Job Description:
- In charge of the assigned plant during normal and incident operation.
- Operate the plant with the agreement of the Controller Material Handling.
- Provides a field supervision service to outside the control rooms during normal and incident operation.
- In the event of a equipment Trip or on the instruction of a Controller, immediately reports to the Control Room. They assists the Controller during any incident by monitoring plant conditions.
- Check and control the field situation by doing inspection and field visit, to ensure system and process in the condition as reported
- Operate equipment locally to monitor problem or assist maintenance team
- Pre-start check all of part equipment before operate or running the equipment
- Perform check level of grease for Lubrication 01 and Lubrication 02, level of oil engine, level of oil hydraulic and level of cooling water or pumping the grease by manually if necessary
- Test run the system or equipment before ship arrive or before operating on manually and automatic
- Maintain good quality of raw material to avoid damage of equipment itself and un-necessary job
- Using light tools for minor trouble on the equipment
- Identify the trouble (i.e. location, part or name of equipment) before reported to control room and supervisor
- Perform full handover to next shift work in the cabin of equipment
- Perform two way communication to control room, supervisor, contractor and any involved party
- Loading gypsum, bottom ash, fly ash and other waste onto the trucks
- Keep operating for good environment, safe and high production
- Perform housekeeping after/before work
- Coordinate with maintenance department and contractors who working in field
Qualifications:
- Minimum Diploma Degree (D3)
- Minimum 1 years experience in fixed plant , heavy equipment or utilities operator or fresh graduate
- Knowledge in fire protection and fire fighting
- Having basic knowledge for electric, mechanic and chemist
- Capable to think and solve problems logically
9. Performance Staff
Job Description:
- Calculate unit availability and heat rate
- Conduct coal fineness sampling
- Perform internal performance test
- Provide material for monthly report
- Provide performance weekly report
- Collect data and monitoring equipment performance
- Monitoring Continuous Emission Monitoring System (CEMS) in accordance with the policy from the government
Qualifications:
- Bachelor Degree of Mechanical/Chemical/Electrical Engineering
- 3 years experiences in Power Plant Industry or 2 years experiences in Power Plant Performance Section.
- Be able to communicate clearly and concisely as well as working without supervision
10. Unit Supervisor
Job Description:
- Assist Make improvements under the Operator Leader approval of the engines and their support equipment
- Assist in recording and observing engine operation parameter data and reporting to superiors in case of equipment interruption
- Periodic monitoring of supporting equipment in the field
- Prepare the supporting data for the manufacturing of enginery operation report
- Coordination and cooperation with PLN WRKR or PLN Dispatcher and gas supplier
- Provide maximum support in achieving production targets
- Responsible for Security, Safety, Health and Environment of work area
Qualifications:
- Bachelor degree in Electrical / Mechanical Enginzeering
- Minimum 3 (three) years experience as Operator in Coal Fired Power Plant
- Have knowledge of Operation in Coal Fired Power Plant.
- Fluently both speaking and written in English.
Catatan:
- Harap selalu berhati-hati terhadap segala bentuk tindak penipuan.
- Selalu hindari lowongan kerja yang memungut biaya saat proses rekrutmen, karena sejatinya mencari kerja adalah upaya untuk mencari dan mendapatkan upah, bukan untuk dipunguti upah.
- Apabila pada proses rekrutmen ternyata dipungut biaya, maka hentikan dan jangan dilanjutkan karena kemungkinan besar itu adalah lowongan kerja palsu.
- Befwork selalu berusaha membantu untuk memilah dan memfilter informasi lowongan kerja yang dipublikasi. Tetapi, alangkah baiknya apabila diimbangi oleh wawasan yang lebih baik juga dari para Befseeker.
Tag: .
